Fabric Performance
What is a Fabric First approach?
The fabric-first approach focuses on improving a building’s envelope, insulation and ventilation systems to reduce energy consumption and move towards net-zero emissions.
Getting this first step correct with your insulation choice is vital for the performance of the building.
How do I ensure that I don’t have a Fabric Failure?
A properly maintained building envelope plays a key role in improving thermal performance. Problems such as draughts, deteriorating seals or damaged insulation can lead to higher heating and cooling demands. Addressing these issues through effective fabric maintenance helps reduce energy consumption while supporting wider sustainability objectives, including lower carbon emissions and improved cost efficiency.
Preventing fabric failure requires a planned and proactive maintenance approach. Building fabric issues rarely appear suddenly, usually develop gradually through water ingress, movement, wear, poor ventilation or neglected maintenance. Regular inspections of roofs, seals, insulation, drainage systems and structural elements help identify early signs of deterioration before they escalate into costly defects.
Is technical support available during design and construction?
Yes, technical support is available throughout both the design and construction stages of your project with Unilin Insulation. Our technical team can assist with the initial specification through to the building completion. With more than 40 years of industry experience, we can advise on insulation specifications, detailing, build-ups, provide on-site Toolbox Talks, CPDs as well as practical technical advice to help ensure your project achieves lasting performance and compliance.
How can Unilin help to prevent performance gaps between design and construction?
At Unilin Insulation, we provide support from the beginning of your project all the way to the performance of your project as a lived-in building. Our technical team are here to assist you with your project and insulation specifications. Our team has 40 + years of experience and can help you with detailing, build-ups, on-site Toolbox Talks, CPD’s and more to ensure your project performs long after the completion.
How can I improve thermal performance in older buildings without causing moisture problems?
To improve the thermal performance of older buildings without causing moisture problems, it is essential to take a whole‑building approach that respects the way traditional buildings manage moisture. Older buildings are typically more permeable and rely on natural ventilation and vapour movement to remain dry, so any energy upgrade must preserve this balance. Before introducing insulation, the building fabric should be made weathertight, with existing defects such as leaking roofs, blocked gutters, cracked render, or rising damp fully addressed. Insulation systems should be compatible with traditional construction. Attention must be paid to junctions, window reveals and internal wall insulation details to avoid cold bridges and the risk of interstitial condensation. In parallel, controlled ventilation, such as passive vents or demand‑controlled systems, should be improved to manage internal moisture levels. By coordinating insulation, airtightness, and ventilation as a single strategy, thermal performance can be enhanced while minimising the risk of long‑term moisture damage.
Unilin insulation products can be used in older buildings, but only where they are carefully specified and detailed as part of a whole‑building retrofit strategy. In traditional or solid‑wall buildings, Unilin’s PIR‑based systems are suitable for wall insulation, roof upgrades, or floors, where moisture risk can be controlled and vapour flow is properly managed. If used internally, they must be combined with appropriate vapour control layers, airtightness detailing, and junction design to avoid interstitial condensation and cold bridging. Crucially, Unilin systems should only be introduced after damp issues are resolved and alongside improvements in controlled ventilation. When applied in the right locations and supported by hygrothermal assessment where necessary, Unilin insulation can significantly improve thermal performance without compromising the moisture balance of older buildings.
What are the biggest causes of poor thermal performance in refurbishment projects?
The biggest causes of poor thermal performance in a refurbishment project can be subject to a few issues. A ‘performance gap’ can be a leading cause of poor thermal performance due to poorly installed or damaged insulation, thermal bridging gaps within the insulation layer or at reveals such as windows and doors. Ensuring that insulation is specified and installed with best-practice implementations gives us the security that poor thermal performance issues will not arise.
What insulation approach is best for a large retrofit project?
A ‘Fabric First’ approach is considered the best path for a large retrofit project as it prioritises upgrading the building envelope’s insulation and airtightness. It is considered the first step within a project’s aim for Future Homes Standard (FHS), NZEB, Passive House (PH) or any other goal a project may aim for under current regulations.
Using a Fabric First approach allows a building to see a reduction in heat loss and airflow regulation, allowing your home to be cool in the summer and warm in the winter and thus saving you money on fuel expenses.
What is the best way to reduce thermal bridging in residential construction?
The most effective way to reduce thermal bridging in residential construction is to design a continuous insulation layer around the building envelope, supported by well-resolved junction details at walls, floors, roofs, and openings. Manufacturers such as Unilin Insulation support this approach at the design stage by providing integrated insulation systems, accredited junction details, and Ψ‑value calculations, which help designers minimise heat loss at critical interfaces such as lintels, wall–floor junctions, and roof connections. By addressing thermal bridging early through coordinated system design rather than relying solely on site fixes, overall fabric performance and regulatory compliance can be significantly improved.
Does Unilin Insulation have EPD’s for their products?
Yes, Unilin provides EPD’s for a wide variety of products. Whether you are looking for Phenolic, PIR, expanded polystyrene or a Bio-enhanced PIR insulation board, we have products within these ranges that are accompanied by EPD’s.
Join our mailing list.
Stay informed of the latest developments with the Unilin Insulation mailing list
"*" indicates required fields
Resources
Have a look at our brochures, technical files and other documents