Products

ECO/CT

Full Fill Cavity Walls

CavityTherm 360 is a bio-enhanced high performance composite board of enhanced PIR with a Lambda value as low as 0.020 W/mK for full fill cavity wall applications.

ECO/CW

Partial Fill Cavity Walls

Cavity Wall 360 is a bio-enhanced partial fill wall insulation system. The system incorporates robust facings, engineered jointing details, preformed corners and has a thermal conductivity of 0.020 W/mK.

Cavity Wall 360 is an environmentally sound choice for Passive and low energy builds. It can achieve a Passive U-Value of 0.15 W/m2K in a traditional cavity wall. When building with Cavity Wall 360 a residual cavity is maintained, offering excellent protection against wind-driven rain.

CT/PIR

Full Fill Cavity Walls

CavityTherm is an innovative built-in insulation for traditional walls that achieves Passive level U-Values as low as 0.13 W/m2K with excellent Thermal Bridging detailing in cavities up to 150mm wide.

CT/PIR FLEX

Full Fill Cavity Walls

CavityTherm Flex is the perfect solution when insulating fair faced inner block walls or when block is laid flat resulting in an uneven surface to accept the insulation. The 25mm flexible fleece layer absorbs any variations due to block tolerances, providing a continuous unbroken bond between insulation layer and block.

XO/XW

Partial Fill Cavity Walls

XtroWall is an innovative partial fill wall insulation system incorporating robust facings, engineered jointing details, preformed corners and a certified thermal conductivity of 0.021 W/mK.

This lower Lambda improves U-Values and meets Passive house levels, proving an excellent choice for Passive and low energy builds. XtroWall can achieve NZEB Standard in a traditional cavity wall. Building with XtroWall, a residual cavity is maintained, offering excellent protection against wind driven rain.

XO/XWP

Partial Fill Cavity Walls

XtroWall Plus is a superior performance insulation with a thermal conductivity of 0.020 Wm/K and an enhanced Euroclass C fire classification. It is faced with a robust aluminium foil and is available with engineered jointing to deliver improved Thermal Bridging detailing.

This lower Lambda improves U-Values and meets NZEB standards, proving an excellent choice for Passive and low energy builds. XtroWall Plus can achieve a passive U-Value of 0.15 W/m2K in a traditional cavity wall. Building with XtroWall Plus, a residual cavity is maintained, offering excellent protection against wind driven rain.

XT/CW (T&G)

Partial Fill Cavity Walls

Thin-R Partial Fill Cavity Wall (T&G) Insulation builds to a system thanks to its engineered tongue and grooved joints and preformed corners, ensuring insulation continuity and minimising of Thermal Bridging

Cavity Wall (T&G) for use in traditional masonry walls, builds to the highest thermal standards whilst maintaining a residual cavity, offering protection from wind driven rain.

SR/TBFL-MF

Drylining Walls

Safe-R Fireline Thermal Laminate is a composite insulated panel comprising of a rigid Phenolic core and 15mm Fireline plasterboard achieving a Euroclass B s1 d0 reaction to fire classification for internal applications. The superior thermal performance provides excellent U-Values with minimal intrusion into valuable living space.

Safe-R Fireline Thermal Laminate achieved a REI 45 fire resistance in a system for ceiling and roof application in accordance with TGD B. This product is designed to provide high levels of thermal insulation and drylining in one operation, with the added assurance of high fire performance combined with excellent thermal values.

XT/TL

Drylining Walls Fixed with Adhesive Dabs

Thin-R Thermal Liner (Dot & Dab) is a composite insulated panel of Unilin PIR insulation core with a composite kraft facing bonded to 12.5mm tapered edge plasterboard for internal applications, fixed with proprietary adhesive bonding.

XT/TL-MF

Drylining Walls – Mechanically Fixed

Thin-R Thermal Liner (Mechanically Fixed) is a composite insulated panel of Unilin PIR insulation core with a composite foil facing bonded to 12.5mm tapered edge plasterboard for internal walls, sloped roofs and ceilings. This product is only suitable for mechanically fixed applications.

SW/RS

Ventilated Rainscreen Cladding

Thin-R Thermal Liner (Mechanically Fixed) is a composite insulated panel of Unilin PIR insulation core with a composite foil facing bonded to 12.5mm tapered edge plasterboard for internal walls, sloped roofs and ceilings. This product is only suitable for mechanically fixed applications.

SR/FB

Steel & Timber Frame

Safe-R Framing Board is designed for use with steel or timber frame applications up to 18m in height. With a Euroclass C Fire Classification the framing board can be used between studs or as an insulated sheathing board. Using Safe-R Framing Board provides excellent U-Values and improved Thermal Bridging detailing.

The use of combustible insulation is restricted on high buildings and buildings of a certain use. Regulations will differ regionally. Seek the guidance of the project architect or engineer before proceeding.

XO/FB

Steel & Timber Frame

XtroLiner Framing Board is designed for use in a wide range of construction including steel or timber frame applications up to 18m in height. The framing board can be used between studs or as an insulated sheathing board. Using XtroLiner Framing Board in this application will reduce the Thermal Bridging of the steel or timber studs

The use of combustible insulation is restricted on high buildings and buildings of a certain use. Regulations will differ regionally. Seek the guidance of the project architect or engineer before proceeding.

XT/TF

Timber Framed Walls

Timber Frame construction is a fast, systematic method that results in high performing buildings with regard to energy efficiency and in environmental terms.

Unilin’s Timber Frame Systems bring timber framed wall insulation performance to new levels, surpassing the default values asked for in current building regulations. Using this product in timber framed walls helps achieve NZEB fabric standards and Passive House Standards.

ECO/MA

Pitched Roofs

Bio-enhanced, superior performance PIR insulation suitable for pitched roofs (ventilated, hybrid or warm). ECO360 MA for roofs offers excellent insulation performance with a thermal conductivity as low as 0.020 W/mK

Using pioneering environmentally conscious technology, ECO360 MA in roof applications will reduce heat loss while also delivering excellent Thermal Bridging details.

ECO/MA

Sarking Warm Roof Construction

Bio-enhanced, superior performance PIR insulation suitable for Sarking Warm Roof construction. ECO360 MA, with a thermal conductivity as low as 0.020 W/mK, in a sarking warm roof application offers an environmentally conscious solution which provides improved detailing, speed of installation and a uniform plane to accommodate more efficient detailing.

This bio-enhanced insulation is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high performance solution for roof insulation.

XO/PR

Pitched Roofs

XtroLiner Pitched Roof on sloped roofs (ventilated, hybrid or warm) provides the most efficient U-Values with minimal intrusion into valuable living space

The roof construction is a critical element in the building fabric and is an area at high risk of heat loss. Using XtroLiner Pitched Roof will reduce heat loss while also delivering excellent Thermal Bridging details.

XO/SK (T&G)

Sarking Warm Roof Construction

XtroLiner Sarking (T&G) is an engineered tongue and grooved external roof insulation system with robust facings which meets the passive U-Value of 0.15 W/m2K.

Using this product improves detailing, speeds up the installation process and provides a uniform plane to detail more effectively. Creating a warm roof reduces the normal amount of junctions prone to Thermal Bridging greatly improving the thermal performance of the roof.

XT/PR_UF (ROOFS)

Pitched Roofs

Thin-R Pitched Roof on sloped roofs (ventilated, hybrid or warm) provides the most efficient U-Values with minimal intrusion into valuable living space.

The roof construction is a critical element in the building fabric and is an area at high risk of heat loss. Using this product will reduce heat loss while also delivering excellent Thermal Bridging details.

XT/RLOC

Pitched Roof Board

Unilin Rafterloc Pitched Roof Insulation has a unique width variation feature offering a 20-30mm adjustment margin to ensure a tight fitting, high performance insulation locked between rafters.

Used in conjunction with a layer of Unilin XT/TL or XT/PR_UF below the rafters, the Rafterloc system provides a robust, cost effective solution to insulating sloped rafters to the most efficient standards with minimal wastage and reduced fitting time.

FR/ALU

Mechanically Fixed Single Ply Waterproofing Systems

Flat Roof ALU is a high performance Polyisocyanurate flat roof insulation with vapour-tight aluminium foil facings suitable for use with single ply membranes. Flat Roof ALU is part of the comprehensive range of Unilin’s high performance flat roof boards providing total solutions for flat roof projects.

FR/MG

Single Ply Fully Adhered/Partially Bonded Built-Up Felt Systems

Flat Roof MG is a high performance Polyisocyanurate flat roof insulation with mineral coated glass facers suitable for use below single ply waterproofing systems (mechanically fixed or fully adhered) and partially bonded built-up felt.

FR/BGM

Partially Bonded, Torched-on, Built-up Bituminous Felt Systems

Flat Roof BGM is faced with a polypropylene fleece finished bitumen/glass working surface and a mineral glass facing to the under side. Flat Roof BGM is part of Unilin’s comprehensive range of high performance flat roof boards providing total solutions for flat roof projects.

FR/TP

Thermal Ply High Performance PIR & Plywood Composite for Flat Roofs

Unilin Thermal Ply is a composite insulated panel of Unilin Polyisocyanurate core with a composite foil facer, bonded to 6mm WBP grade plywood. Thermal Ply is designed to provide high levels of thermal insulation and decking in one operation for new and refurbishment flat roof applications.

XO/XD

Partially Bonded, Self Adhered, Built-up Bituminous Felt Systems

XtroDeck is faced with an embossed aluminium facing on both sides. XtroDeck is part of Unilin’s comprehensive range of high performance flat roof boards providing total solutions for flat roof projects.

XTRAFALL

Flat Roofs

The XtraFall Taper System provides the designer and contractor
with a precise, technically excellent solution to providing thermal
insulation and bespoke drainage on flat roofing that avoids water
retention and consequent damage in traditional flat roofs

ECO/MA

Solid & Suspended Floors

Bio-enhanced, superior performance PIR insulation suitable for solid and suspended floors. ECO360 MA for floors offers excellent insulation performance with a thermal conductivity of 0.020 W/mK.

This bio-enhanced insulation will significantly improve the U-Value of new and existing floors. It is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high performance solution for floor insulation.

XO/UF

Solid & Suspended Floors

XtroLiner Underfloor superior performance PIR offers excellent insulation performance with a thermal conductivity of 0.021 W/mK. The floor in any building is an area of considerable downward heat loss when not properly insulated.

XtroLiner Underfloor will significantly improve the U-Value of new and existing floors. It is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high performance solution for floor insulation.

XT/PR_UF (FLOORS)

Ground Supported & Suspended Floors

The floor in any building is an area of considerable downward heat loss when not properly insulated. Thin-R Underfloor will significantly improve the U-Value of new and existing floors.

Thin-R Underfloor is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high performance solution for floor insulation.

XT/WALK-R

Insulated Loft Decking

Thin-R Loft Decking Walk-R is a composite of high performance PIR insulation with tough OSB board that provides safe access into insulated roof spaces. Walk-R maintains very high insulation values and complies with health and safety guidelines.

SR/ST

Soffit Application

Safe-R Soffit provides effective thermal and fire performance solutions in structural ceiling applications in commercial and residential buildings. This high performance phenolic insulation board is faced with low emissivity foil facings.

Safe-R Soffit Board is supplied as a performance, rather than a decorative product. Refer to Safe-R Soffit Plus, a high performance laminate that offers low maintenance and security protection with a surface that will accept a decorative finish.

SR/STP

Soffit Application

Safe-R Soffit Plus provides effective thermal and fire performance solutions in structural ceiling applications in commercial and residential buildings.

The high performance phenolic insulation board, with low emissivity aluminium foil facings, is adhesively bonded to a 6mm building panel which offers a secure finish for ease of maintenance to which a decorative finish may be applied.

XO/STP

Soffit Application

XtroLiner Soffit Plus provides effective thermal and fire performance solutions in structural ceiling applications in commercial and residential buildings.

The high performance modified PIR insulation board, with low emissivity textured aluminium foil facings, is adhesively bonded to a 6mm building panel which offers a secure finish for ease of maintenance to which a decorative finish may be applied.

SW/ST

Soffit Application

Unilin’s range of non-combustible, Euroclass ‘A1’ Stonewool Insulation provides surety when the highest fire performance is required. Stonewool Soffit provides effective fire performance in structural ceiling applications in both residential and commercial buildings

Our Stonewool Insulation provides a robust, uniform, high density insulation solution suitable for mechanically fixing to concrete substrates

XPS

Extruded Polystyrene Insulation

XPS is a high performance rigid extruded polystyrene insulation board providing a durable thermal solution to technically demanding applications where high compressive loading is a requirement

This product is ideally suited for use in commercial, industrial and cold storage areas where vehicular traffic and loading is an issue.

EPS

Expanded Polystyrene Insulation

The Unilin Hytherm & Warm-R Insulation boards consist of rigid polystyrene boards cut from moulded blocks of white EPS Hytherm or with grey graphite enhanced EPS Warm-R.

SAFE-R CLOSE-R

Cavity Closers

A high performance EN fire-rated cavity closer providing compliance with structural and thermal regulations in Ireland. Structural failures in cavity walls are largely due to the incorrect placement of wall ties within the cavity. Openings at windows and doors require additional wall ties to be placed at a maximum 225mm into the cavity at every course of block. It is also a requirement under TGD Part A that additional wall ties must be placed at gable end openings and either side of expansion joints.

These extra structural ties do interrupt the continuity of the insulation layer and increase Thermal Bridging issues at very vulnerable areas, with mould growth normally most evident at reveals. Safe-R Close-R achieves an excellent fire rating and allows for the correct placement of wall ties to meet TGD Part A structural requirements. The superior insulation performance attains Passive & NZEB standards for Thermal Bridging.

CLOSE-R

Cavity Closers

A high performance EN fire-rated cavity closer providing compliance with structural and thermal regulations in Ireland. Structural failures in cavity walls are largely due to the incorrect placement of wall ties within the cavity. Openings at windows and doors require additional wall ties to be placed at a maximum 225mm into the cavity at every course of block. It is also a requirement under TGD Part A that additional wall ties must be placed at gable end openings and either side of expansion joints.

These extra structural ties do interrupt the continuity of the insulation layer and increase Thermal Bridging issues at very vulnerable areas, with mould growth normally most evident at reveals. Safe-R Close-R achieves an excellent fire rating and allows for the correct placement of wall ties to meet TGD Part A structural requirements. The superior insulation performance attains Passive & NZEB standards for Thermal Bridging.