Hyfloor Strip Foundation System

Hyfloor

Product Details
Product name	Hyfloor Strip foundation system
Material code	Please refer to packing list
Type	Premium PIR insulation
Application	Walls
Thickness	100mm, 110mm, 125mm, 150mm
Inner facing	Foil facing
Outer facing	HIP facer
Thermal conductivity	0.021 (W/mK)
Compressive strength	NPD
Unit of measurement	mm
Size/Dimensions	1200 x 225mm / 1200 x 450mm
Reaction to fire	NPD
Installation guide	Please refer to marketing materials
EPD	An Environmental Product Declaration (EPD), certified by IGBC is available for this product. Please contact technical support for further details.

Thermal Performance

Table 1
Ground Supported Slab

Build Up

65mm screed

Separating layer Polythene sheet
XT/HYF Insulation with Perimeter strips
DPM 1200 gauge Polythene or Radon barrier
Concrete slab

Thicknesses	0.40	0.50	0.60	0.70	0.80
75mm	0.19	0.20	0.20	0.21	0.21
100mm	0.15	0.16	0.16	0.17	0.17
125mm	0.13	0.13	0.14	0.14	0.14
150mm	0.11	0.12	0.12	0.12	0.12

Table 2
Suspended Hollow Core floor

Build Up

65mm screed
Separating layer Polythene sheet
XT/HYF Insulation with Perimeter strips
150mm Suspended Hollow Core floor

Thicknesses	0.40	0.50	0.60	0.70	0.80
75mm	0.19	0.19	0.20	0.20	0.20
100mm	0.15	0.16	0.16	0.16	0.16
125mm	0.13	0.13	0.13	0.14	0.14
150mm	0.11	0.11	0.12	0.12	0.12

Addresses site detailing from an early stage

Y-Values achieved < 0.05

Excellent 0.021 W/mK lambda value

Floor U-Values achieved 0.11 – 0.13 W/m2k

Using blocks suitable for multi storey buildings with a high compressive strength

Complies with standard construction ACDs

Traditional construction, avoiding the need for engineering assurances

Suitable for use with built-in full fill and partial fill wall insulation

Have a look at our brochures, technical files and other documents